Driving with failed stabilizer bar links can be dangerous, particularly when cornering. Without a functional stabilizer bar, the car tends to roll. The inside wheels leave the pavement as the majority of the car’s weight is pushed onto the outside wheels. Check out this best Car parts in Lagos state . There are a few symptoms to watch for that might indicate the links are wearing out. These include:
- The car feels like it wants to roll when going around curves
- Knocking sound from the front when driving over bumps
- Squeaking or squealing when going over bumps
- The car feels “loose” in curves
Causes of stabilizer bar breakage:
Occasionally, while playing its role of stabilizing the vehicle on different terrain, the stabilizer bar will break, often resulting in some noticeable instability in the vehicle, especially while rushing through bends. Below are some of the reasons:
Worn-out shock absorbers:
When the shocks get worn out in a vehicle, it loses balance and tends to tilt to one side or the other, resulting in much of the body weight of the vehicle sitting on the stabilizer bar. Therefore as the vehicle moves on a rough road, the unstable body eventually results in the bar breaking.
Worn-out or broken stabilizer bar bushes:
Rubber bushes help to dampen the friction between the stabilizer bar and other metals, and in case they get worn out, the bar tends to sit loosely, moving when it is not supposed to and the resultant friction leads it to break in the long run.
When some drivers push the vehicle to overstretched limits, mostly on slippery and uneven roads, it sometimes results in the bar breaking.
Accidents or running the vehicle over large and hard objects such as a piece of rock or metal intentionally or unintentionally can also cause breakage.
A stabilizer bar, once broken, may not stop the vehicle from moving, but it would inevitably make it lose some of its stability, which is mostly felt while driving. Check out this best Car parts in Lagos state
Irregular maintenance and alignment:
It also interferes with the wheel alignments while shortening the lifespan of the tyres. Therefore, to avoid the breaking of the stabilizer bar, one should replace worn-out/broken stabilizer bushes, and worn-out Z- links as well as always carry out wheel alignments to maintain the vehicle’s stability.