Mercedes-Benz Auxiliary Battery 12V 1.2Ah N000000004039

Features and Benefits:

• OptiMate TEST records and indicates (for 20 sec) the lowest start volts With engine running, verify charging voltage from alternator and voltage regulator OptiMate Test – A simple, affordable tester designed to be used with the standard OptiMate/AccuMate connection lead, as fitted to a large percentage of cars & bikes on the road, or with the supplied clamp lead.
• Manufacturer/Brand:  
• Part Number: TS-120N
• Alternate Part Number.: ‎TS120N
• Part Description: Battery and Charging System Tester.
• The smart choice for a battery sales counter – check new batteries before sale or test returned batteries
• Length: 40″/100cm
• Charge Connector (INPUT): 2-pin SAE (+set batteryclips)
• Charging AMPS: 10A (Ampmatic current) @ 12V / 5A (Ampmatic current) @ 24V
• Use: -40°C/-40°F very low temperature, remains flexible at ‘below freezing’ temperatures
• Cable Rating: SPT-2W 16 AWG (1.32mm2)
• Style: Fully enclosed electronic circuitry with multiple LEDs, SAE charge connector
• Operation: Fully Automatic
• Quantity Sold: Sold Individually
• Ideal For: 12 V Batteries
• 

Features and Benefits:

• Designed for sensitive electronics: The SAVE program has been designed for SAFE fully automatic low volt start (from 0.5 Volts) and PULSE recovery of deep discharged batteries connected to very sensitive electronics e.g. light aircraft, industrial equipment.
• Manufacturer/Brand:  
• Part Number: TM-522-D4
• Alternate Part Number.: ‎TM522D4
• Part Description: Battery Charger
• Solar Panel:
• Power: 40 Watts (max.)
• Volts: 12V / 12.8V
• Use: Outdoor.
• Style: Weatherproof – polycrystalline, aluminium frame with 4 x mounting brackets, output cable 200cm / 80″ with SAE connector.
• OptiMate Charge-Monitor controller:
• Charging AMPS: 3.33A from 40W panel (max. average current), 3-5A pulse current
• Use: Indoor / Outdoor  (lowest temperature: -4°F / -20°C).
• Input: 15 – 22V
• Style: Weatherproof charge controller case.
• Save: Low Volt Start of 4V
• Safe: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.
• Quantity Sold: Sold Individually
• Included: Weatherproof battery lead, standard battery clip set & 40W solar panel
• Ideal For: STD, AGM & GEL 12V batteries from 2 – 240Ah and Lithium LFP 12.8V / 13.2V batteries

 CHARGE

Saves flat batteries from as low as 4V with its unique pulse action.
Fastest charge is delivered as ‘smart charge’ control selects pulse or continuous charge according to sunlight strength.
Intelligent maintenance continues the next day if battery retained charge overnight, otherwise the program reverts to OPTIMIZE step.

 MONITOR

Battery condition is displayed every 3 seconds. Ready indication for STD, hi-performance AGM and lithium LFP batteries. Draws less than 0.5mA during monitor mode.
Automatically switches to CHARGE when solar power is sufficient.

MOUNTING

The OptiMate charger-monitor controller is separate to the solar panel and can be placed close to the vehicle or battery so that charge and maintenance progress can be easily followed. The solar panel must be mounted and angled to receive direct sunlight. The reach / distance between battery and panel is 315cm / 124″. To extend, use OptiMate Cable Extenders O-03, O-13 or O-23 and insert between the solar panel and the OptiMate charge-monitor controller.

Outer dimension, including corner mount brackets : Width= 42 cm / 16.6”  Height= 68.6 cm / 27”  Depth= 3.3 cm / 1 _1/4“