OptiMate 7 Select 10A 12V Battery Charger TM-252V3

OptiMate 7 Select 10A 12V Battery Charger

Maintain and boost your new, old and dead car battery with genuine Optimate products. This is a device manufactured by Tecmate from top-quality materials to ensure the safety and maximum performance of your vehicle battery.

Features and Benefits:

  • PowerSupply, to aid in diagnostics and troubleshooting
  • Temperature compensation: Voltage is adjusted higher when colder, or lower when hotter.
  • Automatically adjusts current to match battery size and condition.
  • Maintains battery at full charge and in good health.
  • Manufacturer/Brand: TecMate  
  • Part Number: TM-252V3
  • Alternate Part Number.: ‎TM-250V3 / TM-251V3  / TM-257 / TM-258V3
  • Part Description: Battery Charger
  • Charging Volts: 12V range (3 modes): 0.5V – 14.4V, 0.5V – 14.7V, 0.5V – 13.6V (PowerSupply
  • Charging AMPS: 10A (Ampmatic current)
  • Use: Indoor / Outdoor  (lowest temperature: -40°F / -40°C).
  • Input: Global (100-240V 50-60Hz), high efficiency (CEC listed).
  • Style: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector.
  • Save: Low Volt Start of 0.5V + 2-step desulphation recovery.
  • Safe: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.
  • Available models: All OptiMate battery chargers accept global input of 100-240Vac 50-60Hz, only the power plug TYPE is different to comply with national/regional electrical safety laws.
  • Operation: Selectable
  • Quantity Sold: Sold Individually
  • Included: weatherproof battery lead & battery clip set
  • Ideal For: AGM, GEL, STD, EFB & DEEP CYCLE 12V batteries from 3 – 240Ah..
Compare

 105,000.00 Inc VAT

  • USD: 253.23$

Add to wishlist Add to compare

Description

OptiMate 7 Select 10A 12V Battery Charger ‘GOLD series’, the ‘PRO choice’ battery charger that gets the full potential out of your high-performance 12V battery. Includes power supply to support battery during tuning/troubleshooting.

Ideal for 12V engine start (SLI) and deep cycle lead-acid batteries found in the vehicles/craft above.
Select charge voltage of 14.4V for most batteries or 14.7V for premium AGM batteries, or select Power Supply support mode – Selection remains in memory even if AC power is lost.
Power Supply mode provides constant power for vehicle tuning, diagnostics, and troubleshooting.
A fully automatic multi-step program brings the battery safely to full charge – Connect to the battery and OptiMate 7 Select does the rest, no supervision is required.

OptiMate 7 AmpMatic 10A 12V Battery Charger TM-254BS

OptiMate 7 Select 10A 12V Battery Charger is perfect for starter and deep cycle 12V batteries that demand accurate temperature-controlled charging and unsupervised safe long-term maintenance. Voltage selection (14.4V / 14.7V) ensures the battery receives charge at the correct voltage.

Specification

Weight1.46 kg

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published.

WhatsApp chat