Optimate Battery Status/Charge System Monitor – O-128V2

Optimate Battery Status/Charge System Monitor:

Maintain and boost your new, old and dead car battery with genuine Optimate products. This is a device manufactured by Tecmate from top quality materials to ensure safety and maximum performance of your vehicle battery.

Features and Benefits:

  • Smart battery lead that measures voltage; monitors charge of a ‘larger’ stored 12V lead-acid battery and confirms if the vehicle charging system is working correctly.
  • Monitor charge of stored power sport vehicle 12V lead-acid battery or confirm if the vehicle charging system is working correctly
  • 2 automatic Modes – Battery charge level monitor (single LED blink mode) & Charging system test (arrow mode)
  • 4 LEDs cover ‘full to empty’ voltage range of all 12V batteries, including higher voltage AGM for power sport (4th vv LED = 12.7V )
  • Battery charge level : LED matching charge level blinks every 3 seconds (long term draw less than 0.2mA)
  • Vehicle Charge system : LED arrow mode activates when charge voltage reaches minimum 13.5V (v green LED) or ideal range of 14V+ (vv green LED)
  • Manufacturer/Brand: TecMate  
  • Part Number: O-128V2
  • Alternate Part Number.: ‎O-128V2
  • Part Description: Optimate Battery Status/Charge System Monitor
  • Length: 40″/100cm
  • Battery Connector: 5/16” (M8) / 3/8” (M10) ringlets
  • Charge Connector (INPUT): 2-pin SAE, protected from dirt and liquid with rubber sealing cap and shroud.
  • Vehicle storage: 4 LEDs cover ‘full to empty’ voltage range of all 12V batteries, including higher voltage AGM for power sport (4th √√ LED ≥ 12.7V ). LED matching charge level blinks every 3  seconds (long term draw less than 0.2mA).
  • Vehicle running: LED arrow mode activates when charge voltage reaches ideal charging voltage; up to minimum 13.5V ( green LED) or ideal range 14V+ (√√ green LED).
  • Fuse: 15 Amp
  • Use: -40°C/-40°F very low temperature, remains flexible at ‘below freezing’ temperatures.
  • Cable Rating: 16 AWG (1.31mm2) SPT-2W
  • Style: Fully enclosed electronic circuitry with 4 LEDs, SAE charge connector with rubber sealing cap & shroud.
  • Operation: 2 automatic Modes – Battery charge level monitor (single LED blink mode) & Charging system test (arrow mode).
  • Quantity Sold: Sold Individually
  • Ideal For: Ideal charge range with engine running – 13.5V to 14.5V.
Compare

 13,000.00 Inc VAT

  • USD: 31.35$

Add to wishlist Add to compare

Description

Optimate Battery Status/Charge System Monitor, Weatherproof long battery lead with state of charge monitor for ‘12V’ batteries – 24-7 battery status at a blink of a LED.
Ideal for 12V lead-acid batteries found in the vehicles and craft above.
SAE quick connect charge port for charging battery when needed!

Longer 100cm / 40″ length with M8 (5/16″) / M10 / (3/8″) ringlets that fit a variety of battery terminals, with 15A fuse that protects the -40° rated cable and electronics – Premium quality!

OptiMate Test – Battery and Charging System Tester TS-120N

The OptiMate battery tester’s microprocessor draws very low power from the battery itself to determine and display battery status. Tests all 12V Lead-acid batteries and displays result that can be used to convey information to customer.

State of charge monitor:

With weatherproof sealing cap.

Battery status indication every 3 seconds (LED blinks).

Battery status indication for high performance AGM.

Specification

Weight0.254 kg

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

You can get in touch with any of our Agent available on WhatsApp
//
Agent 2
Customer Service
//
Agent 1
Customer Service
|
//
How can we help?